interrupts and will not resume until the objects are removed. The hob may not be used during this operation.
WARNING!
Before each operation, disconnect the appliance from the mains electricity. Depending on the mains voltage, the appliance must be connected according to the electrical diagram below. The protection conductor (equipotential protection conductor) must be connected to the earthing clamp.
The connection wire must be fed through the bracket that protects it against accidental movements. Once the connection is completed, turn on all the cooking zones for at least 3 minutes to verify their operation.
Electrical diagram
The following wires can be used for the electrical connection:
•Type H05
•PVC type
26
