19
A.Cooker hob on/off sensor
B.Heat setting or residual heat indicators
C.Cooking zone on/selection sensor (+)
D.Safety lock/child safety device
on/off sensor
E.Sensor (-)
F.Dual circuit sensor
G.
Indicator signalling the additional heating circle
▪ All the indicators light up (for an instant) when the cooker ho b is
turned on. The cooker hob is ready for use.
▪ The cooker hob is equipped with electronic sensors that turn o n if
the relative surfaces are touched for at least 1 second.
▪ A buzzer sounds every time the sensors turn on.
▪ Do not place any objects on the sensor surface (error signal).
Make sure that the sensor surface is always kept clean.
▪ Touch the on/off sensor (A) for at least 1 second. The cooker hob
activates and »0« appears on all the heat setting indicators (B).
▪ The subsequent operation must be effected within 20 seconds or
the cooker hob will turn off.
If the cooker hob was turned on with the on/off sensor (A), the
desired cooking zone can be selected within the next 20 seconds.
• When pressing the sensor (C) for the desired cooking zone, the
corresponding display visualises heat setting »0«.
• Pressing sensors »+« (C) or »-« (E) allows for selecting heat
settings 1-9.
Pressing and holding sensors »+« (C) or »-« (E)
automatically decreases or increases the heat settings. This
can also be done by touching the corresponding sensors
individually and modifying the heat setting by a single level
each time.
The settings can be adjusted only for the selected cooking
zone. The display will visualise the symbol »0«, or „H“ if the
cooking zone was previously heated (see paragraph relative
to residual heat).
1.Front left Hi-Light cooking zone
2.Rear central Hi-Light cooking zone
3.Front right Hi-Light cooking zone
4. Cooker hob control unit
GLASS-CERAMIC COOKER HOB MODEL "7316-000"
Cooker hob controls
Cooker hob operation
Turning the cooker hob
on
Turning the cooking
zones on