Pipettor Programming
7.Position the pipette tip to dispense and press the Start Button. The unit will
dispense the second 1.00mL aliquot.
The following display indicates that unit is ready to dispense the third of the three 1.00mL aliquots.
8.Position the pipette tip to dispense and press the Start Button. The unit will
dispense the third 1.00mL aliquot.
The following display indicates that unit is ready to perform a new repeat dispensing series.
9.Eject the disposable tip and repeat the series beginning with Step 4.
Page 8 of 15 - June 2001
Pipettor Programming
1mL Pipetting
1.Press 
repeatedly until the display reads:
2.Press 
to enter selection.
3.Attach a pipette tip to the tip cone.
The pipettor is now ready to aspirate 1.00mL.
4.Place the tip in the sample and press
the Start Button. The unit will aspirate 1.00mL.
The next display indicates that the unit is ready to dispense the total volume (1mL) with blowout.
5. Position the pipette tip to dispense and
press the Start Button. The unit will dispense the full amount from the tip.
The display now indicates that the unit is ready to repeat the 1mL pipetting, beginning with the 1.00mL aspiration.
15 | 16 |
