Page 16
To verify the fault location, insert the frame's red probe directly on the
spot identified above. Pivot the frame in a circle around the red leg re-
inserting the green leg in the ground every few degrees of the circle. The
bar graph should always be on the left (red) indicating that the fault is
directly below the red leg.
After a fault is found and pinpointed, move the Earth Contact Frame
about one frame width away from the fault and insert it in the ground
with the green-banded leg towards the fault. Compare the numeric
indicator reading with the fault level reference in the lower left corner of
the display. If they are close, the fault is the major one. If the fault
reading is 20 points less than the reference reading, multiple faults may
exist. Further searching is necessary to find the fault with the highest
reading.
cable path
red leg