EVM and User Interface, Turning On/Off and Navigating

EVM and User Interface

1. Press key power on. (Following a splash/welcome screen, the Start screen will appear.)

2.Navigating to measurement screens - press keys.

•Navigating to menu options - press keys.

•To open a selected menu or to save settings - press key.

3.In the powered on mode, press and hold key to power down the instrument.

You will visit the start screen frequently to access measurements, setup, calibration, unit info, and file system screens.

;; Press keys to access the measurements screens.

;; To select a menu option, press keys.

Image 2

Contents

Quick Start Guide Start Screen and Measurement Views EVM and User InterfaceTurning On/Off and Navigating Particulate Measurements Reset/Clear memory, if necessary Start\File System menuOverview of running measurements Logging Particulates Particulate Zero CalibrationParticulate Advanced Calibration Gravimetric PID Span Calibration Volatile Organic Compounds VOCsPID Zero Calibration Logging VOCs Toxic and Carbon Dioxide Zero Calibration Toxic GasesCarbon Dioxide Gas Type of Gas Range Res Zero cal Span cal Logging Toxic Gases or Carbon Dioxide Measuring particulatesToxic and Carbon Dioxide Span Calibration Navigate to the Setup\Calibration\Flow RT rate screen Temperature and Relative HumidityLogging/Viewing Temperature and/or Relative Humidity Particulate Air Flow Navigate to Start \Past Session screen Air VelocityViewing Logged sessions past sessions Sensors Locations Maintenance/CleaningThin-layer of silicone is applied to a clean impactor Impactor Care and Particulates Communicating Viewing your data 074-301, Rev.D /13