3M 505 Attaching and Storing the Model 505 Unit Hose, Insert flange in, groove and snap, into place, unit hose, Press this tab, to release hose

Check the 3MTM Bair HuggerTM therapy website to ensure you have the most recent version of this document. www.bairhugger.com reorder #202431A

Bair Hugger Model 505 Temperature Management Unit Operator’s Manual English  11

Insert flange in	Press this tab
groove and snap	to release hose
into place

Hang hose clip tab in this slot for storage

Figure G. Attaching the Model 505 unit hose Figure H. Storing the Model 505 unit hose

Attaching and Storing the Model 505 Unit Hose

The Model 505 unit has a unique “snap-fit” hose. This extended-length swivel hose, adapted for 241 blood/fluid warming, attaches by inserting the flange end at a 45° angle in the grooved blower outlet and snapping the hose into place.

Press the white tab on the blower outlet to release the hose.

When storing the Model 505 unit, insert the hose clip tab in the hanger slot near the blower outlet.

English  202431A