Check the 3MTM Bair HuggerTM therapy website to ensure you have the most recent version of this document. | www.bairhugger.com reorder #202431A |
12 English | Bair Hugger Model 505 Temperature Management Unit Operator’s Manual |
General Maintenance
Cabinet Cleaning
1.Disconnect the temperature management unit from the power source before cleaning.
2.Use a damp soft cloth and a mild detergent to clean the unit cabinet. Dry with a separate soft cloth.
Caution
•Do not use a dripping wet cloth to clean the cabinet. Moisture may seep into the electrical contacts, damaging the components.
•Do not use alcohol or other solvents to clean the cabinet. Solvents may damage the labels and other plastic parts.
Technical Service and Order Placement
usa, worldwideTel:1-800-228-3957In-Warranty Repair and Exchange
Replacement parts to correct a problem are delivered at no charge. To return a device to 3M Patient Warming for service, first obtain a Return Authorization (RA) number from a technical service representative. Please use this number on all correspondence when returning a device for service.
A shipping carton will be delivered to you at no charge, if needed. Call your local supplier or sales representative to inquire about loaner devices while your device is being serviced.
When You Call for Technical Support
Remember, we will need to know the serial number of your unit when you call us. On Model
505 units, the serial number label is affixedto the rear panel.Serial number label
Figure J. Serial number label on Model 505
3M Patient Warming 3M Health Care.