3M 533, 733, 530 manual Installation into Closure or Terminal

4.0Grommet Assembly Installation using the 3M™ Scotchlok™ 4460-D/FO-CSM For LBT

4.1Please refer to instruction manual 78-0013-

2695-4 3M Scotchlok Shield Bond Connector Assembly 4460-D/FO-CSM for LBT for installation instructions.

4.2Assembly is now ready to place in the end seal of the closure or terminal. Refer to instruction manual document number 78-8135-4502-3 for end seal installation.

5.0Grommet Assembly Installation using the 3M™ Scotchlok™ Shield Bond Connector 4460-D/FO

5.1Please refer to instruction 78-8128-0289-6 3M

Scotchlok Shield Bond Connector Assembly 4460-D/

FO and 4460-D/FO-SS for installation instructions.

6.0Installation into Closure or Terminal

6.1Assembly is now ready to place in the end seal of

the closure or terminal. Refer to instruction manual number 78-8135-4502-3 for end seal installation.

6.2Place cable and grommet assembly onto cable addition bracket such that the retention tab slips between the two cables as shown.

Note Place the grommet and cable assembly such that a minimum of 0.78"(19.8 mm) of cable jacket extends past the hose clamp.

4 78-8135-7466-8-B