Manuals / KitchenAid / Kitchen Appliance / Ventilation Hood

KitchenAid LI3Y9B/W10320584E Install Range Hood, Connect Vent System, Complete Preparation

Models: LI3Y9B/W10320584E

1 28
Download 28 pages 7.81 Kb
Page 7
Image 7

4.Mark centers of the fastener locations through the template to the wall.

IMPORTANT: All screws must be installed into wood. If there is no wood to screw into, additional wall framing supports may be required.

Remove the template.

5.Drill ³⁄₁₆" (4.8 mm) pilot holes at all locations where screws are being installed into wood.

6.Install the 2 - 5 x 45 mm mounting screws. Leave a ¹⁄₄" (6.4 mm) gap between the wall and the back of the screw head to slide range hood into place.

¹⁄₄" (6.4 mm)

Vent Cover Bracket Installation

7.Attach vent cover bracket to wall flush to the ceiling using 2 - 5 x 45 mm screws.

A

B

C

A.Ceiling

B.Wall

C.Centerline

Complete Preparation

1.Determine and make all necessary cuts in the wall for the vent system. Install the vent system before installing the hood. See “Venting Requirements” section.

2.Determine the required height for the home power supply cable and drill a 1¼" (3.2 cm) hole at this location.

3.Run the home power supply cable according to the National Electrical Code or CSA Standards and local codes and ordinances. There must be enough ½" conduit and wires from the fused disconnect (or circuit breaker) box to make the connection in the hood’s electrical terminal box.

NOTE: Do not reconnect power until installation is complete.

4.Use caulk to seal all openings.

Install Range Hood

1.Using 2 or more people, hang range hood on 2 mounting screws through the mounting slots on back of hood.

A

B

C

A. Mounting screws

B. Mounting slots

C. Lower mounting screws and washers

2.Remove the grease filter. See “Range Hood Care” section.

3.Level the range hood and tighten upper mounting screws.

4.Install 2 - 5 x 45 mm lower mounting screws and 2 - D6.4 x 18 mm washers and tighten.

Connect Vent System

1.Install transition on top of hood (if removed for shipping) with 2 - 3.5 x 9.5 mm sheet metal screws.

A

B

A. Vent transition

B. 3.5 x 9.5 mm screw

For vented installations only:

1.Fit vent system over the exhaust outlet.

2.Seal connection with clamps.

3.Check that back draft dampers work properly.

7

Page 6 Page 8
Page 7
Image 7
KitchenAid LI3Y9B/W10320584E Install Range Hood, Connect Vent System, Vent Cover Bracket Installation
Page 6 Page 8

LI3Y9B/W10320584E specifications

The KitchenAid LI3Y9B/W10320584E is a highly efficient and versatile stand mixer designed to meet the demands of both amateur cooks and professional chefs. Renowned for its durability and performance, this kitchen appliance is a staple in many households.

One of the standout features of the LI3Y9B is its powerful motor, which drives the mixing process with ease. With a robust horsepower, this stand mixer can handle even the toughest doughs and ingredient mixtures. The motor is designed to provide consistent power, ensuring that precise mixing is achieved every time.

The mixer features a tilt-head design, allowing for easy access to the mixing bowl and attachments. This design enhances convenience during food preparation, making it simple to add ingredients or switch out mixing tools. The generous bowl capacity is another plus, accommodating large batches of dough or batter, which is particularly beneficial for baking enthusiasts.

In terms of versatility, the KitchenAid LI3Y9B/W10320584E comes equipped with multiple speed settings that cater to a wide range of mixing tasks. Whether you are whipping cream, kneading bread dough, or mixing cookie batter, you can easily adjust the speed to suit your needs. The inclusion of various attachments enhances its functionality, allowing users to tackle an array of culinary tasks, from shredding cheese to making pasta.

The mixer is constructed with high-quality materials built to last, ensuring that it can withstand the rigors of daily use. The design is not only practical but also aesthetically pleasing, available in various colors to complement any kitchen décor.

Another noteworthy characteristic is its ease of cleaning. The bowl and attachments are dishwasher safe, making cleanup after cooking or baking a breeze. Additionally, the mixer’s design minimizes the risk of ingredient splatter, providing a cleaner cooking experience.

In summary, the KitchenAid LI3Y9B/W10320584E stands out for its powerful motor, versatile speed settings, durable construction, and user-friendly features. Whether you are an everyday home cook or a baking aficionado, this stand mixer is an excellent addition to any kitchen. Its combination of performance, functionality, and style makes it a valuable tool for culinary creativity.