8
Quick Connect Guide (Figure 1)
‘Push-In’ Tubing Connector
(Quick Connect Fittings) This product is outfitted with user friendly
‘Push-In’connectors.Proper useofthe con-
nectors is shown in the diagrams. It is most
important that the tubing selected for use with
these connectors be of high quality, exact size
and roundness and with no surface nicks or
scratches. If it is necessary to cut the tubing,
use a plastic tubing cutter or sharp razor knife.
Makeacleansquarecut.Shouldaleakoccur
ata‘Push-In’connector,the causeis usually
defective tubing.
To Fix:
 •Relievepressure
 •Releasetubing
 •Cutoffatleast1/4”fromend
 •Reattachtubing
 •Conrmconnectionisleakfree
To reduce the risk associated with property damage due to water leakage:
• Ensure all tubing and fittings are secure and free of leaks.
• Do notinstallunitifcolletismissing.ContactCUNOifcolletsaremissingfromanyttings.
CAUTION
1
2
Grey Collet
Tube
1 2
gnibuT esaeleR oT gnibuT hcattA oT
Push tubing straight in as far as it will go. Tubing must be
inserted past o-ring and hit backstop. Pull tube to ensure
it is secured.
Push in grey collet to release tubing. With collet held, pull
tubing straight out.