Model C1060 Headset Intercom System | Replacement Parts and Service |
Service Procedures (continued)
Mic Boom Assembly:
1.Locate and remove the retaining ring using the retaining ring pliers.
Caution
Make sure you set the retaining ring tool adjustment screw to limit how far the retaining ring is expanded. Unless this is done, the retaining ring will stretch out of shape to a point where it will not stay in its groove.
2.Remove the Spring Washer, Nylon Washer, and Mic Boom.
3.Reinstall the Mic Boom by performing steps 1
– 3 in reverse order.
Caution
Care must be taken when reinstalling Mic Boom Retaining Ring to not roll the edge of the shaft into the ring retention slot.
♥3M 2005 November | 10 |
