Model C1060 Headset Intercom System | Replacement Parts and Service |
Service Procedures (continued)
Checking out Headset Operation
Tools Required:
Functioning Wireless Intercom System with at least one additional model C1060 Headset.
Procedure:
NOTE
Check headset operation before replacing the case screws. It is a good idea to simply snap the case together without the screws until the headset is completely checked out.
1.Make sure a fully charged battery is installed in the headset being tested.
2.Turn on the headset and cycle through all of the operating modes described in Headset Intercom System Model C1060 Operating Instructions. These Operating instructions are available by ordering 3M Stock Number
3.Replace three case screws, ear cup and pad.
♥3M 2005 November | 14 |