3M™ Pocket Projector MP180
Charge the Battery
The 3M MP180 rechargeable battery gives you up to two hours of battery life. When the battery needs to be charged, the status indicator LED flashes red. The battery should be fully charged before using the 3M MP180 projector.
Charge the battery by connecting the 3M MP180 power adapter to the projector. When the power adapter is connected, the LED flashes green three times and then stays solid green. When looking at the home screen, the battery status icon is animated while charging and full when charging is complete.
1Turn the projector power off.
2Connect the power adapter to the projector’s DC input.
3Connect the other end of the power adapter into the electrical outlet.
4The status indicator will change to amber while the battery is charging.
5Allow three hours to fully charge the battery. When charging is complete, the status indicator will turn off.
English
© 2011 3M. All Rights Reserved. | 13 |