3M™ Pocket Projector MP180
Status Indicator Light
The status indicator light provides information about the projector’s state.
English
Status Indicator Light
Flashes green three times
Blank
Flashes green Solid green Solid amber Flashes amber
Flashes red twice and pauses then repeats
Flashes red
Meaning
A new power source is connected to the projector and the projector is ready to be powered on.
Projector is off or in sleep mode. If the power adapter is connected to the projector and the battery is installed, the battery has finished charging.
The projector is starting up. The projector is on.
The projector is off and charging the battery. The projector has overheated and needs to cool.
The projector cannot charge the battery.
The battery needs to be charged.
Video Mode Icons
The projector will display a video icon when it is connected to a video cable or a video source. If no cables or devices are detected, the home screen will display.
| Icon |
| Description/ Meaning |
|
|
| The projector detects the AV cable. |
|
|
| The projector detects an NTSC video input signal. |
|
|
| |
|
|
|
|
| NTSC |
|
|
|
|
| The projector detects a PAL video input signal. |
|
|
| |
|
|
|
|
| PAL |
|
|
|
|
| The projector detects the component AV cable. |
|
|
| The projector detects the video input signal and displays the video |
|
|
| |
|
|
| source’s resolution and refresh rate below the component icon. |
RGB 480i | 60Hz | ||
|
|
| The projector detects the |
|
|
| The projector detects computer input signal and displays the input |
|
|
| |
|
|
| resolution and refresh rate. |
800x600 | 60Hz | ||
|
|
| The projector does not support the video signal. |
|
|
| The projector is measuring and synchronizing to video input signal. |
© 2011 3M. All Rights Reserved. | 19 |