English
3M™ Pocket Projector MP180
4Power up the projector.
5Select SD card in Mass Storage Source settings. From the home screen, tap
the Settings icon , then the Machine Settings icon and
finally the Mass Storage Source button. Select SD card from the list and the screen will return to the Machine Setting screen. Tab the Back button twice and return to the home screen.
6Connect the projector to the USB port on your computer and a new removable disk will appear in the file browser on the computer. This new removable disk is the microSD card in the MP180 projector.
Note: If you do not see either the MP180 or microSD removable disk in Windows Explorer, you must reassign the drive to a new drive letter not already used by another drive. Please refer to KB297694 on the Microsoft Support website.
7Open the microSD disk from your computer and create a folder labeled “upgrade”.
8Copy “upgrade.img” into the “upgrade” folder.
9After the file copy is complete, disconnect the USB cable from the projector and computer. Once the USB cable is disconnected, the touch screen on the projector will display the home screen.
10Open the Settings menu.
11Select the firmware upgrade icon and tap the Yes button.
12The update will begin and will take about 10 minutes to complete.
54© 2011 3M. All Rights Reserved.