Maintenance
Resetting the Lamp Hours
Please do the following within 10 minutes from turning power on if you replace the lamp after 1500 hours.
1.Press the Exit button on projector or remote control for three seconds to display the total used lamp time.
2, Press MENU button on projector or remote control during the lamp hour message. Then an adjustment message will appear.
3.Press 
or 
to select the setting. To select the default setting, select “Reset” (or “Cancel” to return to the default setting).
4.Press EXIT to leave.
© 3M IPC 2000 | 3M™ Multimedia Projector MP7730 |
31
