3M MP8630 manual Example of computer signal

c.Example of computer signal

Computer/Signal source		Resolution			fH		fV	Sync Signal	Interlaced /	Note
		H	× V	(kHz)			(Hz)		Non-interlaced
	VGA-1		× 350					H, V separate	Non-interlaced	Note: 3
		640		31.5		70.1		H: Positive
(IBM™ compatible)
								V: Negative
	VGA-2		× 400					H, V separate	Non-interlaced
		640		31.5		70.1		H: Negative		Note: 3
(IBM™ compatible)
								V: Positive
	VGA-3		× 480					H, V separate
		640		31.5		59.9		H: Negative	Non-interlaced	Note: 3
(IBM™ compatible)
								V: Negative
Macintosh™ 13 inch mode			× 480					H, V separate		Note: 1
		640		35.0		66.7		H: Negative	Non-interlaced
	(Apple™)
								V: Negative
		640 × 480				72.8		H, V separate		Note: 3
VESA 72 Hz standards				37.9				H: Negative	Non-interlaced
								V: Negative
	SVGA		× 600			60.3		H, V separate
		800		37.9				H: Positive	Non-interlaced
	(VESA 60Hz)
								V: Positive
	SVGA		× 600	48.1		72.2		H, V separate	Non-interlaced
		800						H: Negative
	(VESA 72Hz)
								V: Negative
Macintosh™ 16 inch mode			× 624	49.7		74.5		H, V separate	Non-interlaced
		832						H: Negative		Note: 1
	(Apple™)
								V: Negative
	XGA	1024	× 768	49.1		60.1		H, V separate	Non-interlaced	Note: 2
								H: Positive
	(VESA 60Hz)
								V: Positive
	XGA	1024	× 768	60.2		75.0		H, V separate	Non-interlaced	Note: 2
								H: Positive
	(VESA 75Hz)
								V: Positive

Note 1: MAC adapter is necessary to set the resolution mode.

Projector is compatible with 13 inch mode and 16 inch mode.

Set all dip switches OFF except those indicated in the chart.

For example:

MAC 13" mode = switch 1, 5 and 6 are ON

MAC 16" mode = switch 2, 5 and 6 are ON

(Example of 16 inch mode)

Note 2: XGA (1024 x 768) will have less resolution, due to compression techniques used to display the image

Note 3: Some input sources may not be displayed properly because they are not compatible with the projector.

3M™ Multimedia Projector MP8630 © 3M 1997

20