Chapter 1 Getting Started With Your CRT Desktop Monitor | 15 |
35 million mechanical touches without noticeable degradation to the surface.1
System RequirementsThe CRT desktop touch monitors require a personal computer (PC). These touch monitors will not work with Macintosh computers.
The requirements for your PC are as follows:
•Depending on the type of monitor you purchased, you must have either an
•Your PC must have a video card and video driver already installed for the monitor. If you need to install a video card or a video driver, refer to your computer documentation for instructions.
•Your PC must have a unique interrupt request (IRQ) available to the touch screen COM port. The touch screen cannot share an IRQ with another device.
•If the only serial port available on your PC has 25 pins, you will need a
When choosing your workspace, select a sturdy, level surface. Also, make sure you can easily access the back of the touch monitor and the computer. Easy access helps ensure a smooth setup of the touch monitor.
Note: Before setting up your CRT touch monitor, refer to the Important Safety Information section at the beginning of this document.
1Mechanical touches tested in a single x/y location using a