3M RS-232 Installing the Tilt/Swivel Stand, Connecting the Touch Monitor, CRT Monitor Setup

Chapter 1 Getting Started With Your CRT Desktop Monitor 17

CRT Monitor Setup

No tools are required to set up the CRT Desktop monitor. Simply follow the instructions outlined below.

Installing the Tilt/Swivel Stand

1.Align the stand with the slots in the bottom of the monitor and insert the Tilt/Swivel Stand into the slots.

2.Push the Tilt/Swivel Stand firmly toward the front of the monitor until the latch clicks into the locked position.

Connecting the Touch Monitor

1.Turn off your computer.

2.Connect the video cable to the video card in your computer.

3.Connect the RS-232 (or USB) serial touch screen cable to the appropriate port on the back of your computer.

4.Connect the power cable to the monitor. Connect the other end to the appropriate AC outlet.