ENGLISH
Operator’s Guide | 3M™ Super Close Projection System SCP725 |
|
|
mWARNING
To reduce the risk associated with hazardous voltage:
•Do not operate this projector in wet environments or outdoors.
•Do not modify this projector or power cord.
•Do not remove any screws other than those specified in the lamp replacement instructions.
•Do not attempt to service the projector other than the lamp cartridge. There are no user serviceable parts inside the projector.
•Contact a 3M authorized service provider for service.
•Disconnect power cord when the projector is not in use for extended periods of time, during lamp replacement, and while cleaning.
•Do not allow water or other liquids to enter the projector.
To reduce the risk associated with hazardous voltage and/or fire:
•Replace power cord if damaged.
•Contact a 3M authorized service provider if the projector becomes damaged.
•Use a grounded extension cord with a rating at least equal to that of the projector.
•Connect this projector to a grounded outlet.
To reduce the risk associated with choking:
•Keep the battery and battery cover away from children and pets.
To reduce the risk associated with hazardous voltage, impact, tripping, or intense visible light:
•Do not use this projector around unsupervised children.
To reduce the risk associated with sharp objects, premature lamp failure, exposure to mercury:
•Always handle the fragile lamp module with care.
•Replace the lamp module when the lamp replacement message appears.
•Never replace the lamp module with a previously used lamp module.
•Remove the projector from the ceiling or wall mount before replacing the lamp.
To reduce the risk associated with permanent vision impairment:
•Do not allow a child under the age of 8 years to view 3D images.
10 | © 3M 2011. All Rights Reserved. |
