3M X40, S40 manual Ports and Cables, Function Projector Port Connection Cables

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.

Function	Projector Port	Connection Cables
		RGB cable
RGB input	rgb	with D-sub 15-pin shrink jack and
		inch thread screws
AUDIO input	audio	Audio cable with stereo mini jack
(from the computer)
RS-232C communication	control	RS-232C cable
S-video input	s-video	S-video cable
		with mini DIN 4-pin jack
Video input	video	Audio/video cable
	component video Y
Component video input	component video CB/PB	Component video cable
	component video CR/PR
Audio input	audio L	Audio/video cable or
(from video equipment)	audio R	Audio cable with RCA jack

NOTE About Plug-and-Play Capability

•This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel)

compatible. Please take advantage of this function by connecting the accessory RGB cable to the rgb port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

•Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).

•Please use the standard drivers as this projector is a Plug-and-Play monitor.

9