TURNING OFF THE POWER
| STANDBY/ON |
VIDEO | RGB SEARCH |
ASPECT | AUTO BLANK |
MAGNIFY | VOLUME |
ON |
|
| MUTE |
OFF |
|
FREEZE | KEYSTONE |
POSITION | MENU |
| ENTER |
ESC | RESET |
1 | Press the STANDBY/ON button of remote |
| controrol or the on/off button of control panel |
The message "Power off?" will appear on the screen for approximately 5 seconds.
2 | Press the STANDBY/ON or on/off button |
| again(remote control or control panel) |
Press the STANDBY/ON or on/off button again while the "Power off?" message is visible. The projector lamp goes off and starts cooling down. The power indicator blinks orange while the lamp cools down. (Pressing the STANDBY/ON or on/off button while the power indicator is blinking orange has no effect.)
The system goes into the STANDBY mode after cooling down and the power indicator stops blinking orange and then lights to solid orange.
Control panel
on off
video rgb
reset
lamp
keystone | temp |
power
menu
NOTE
•Except in emergencies, follow the above- mentioned procedure for turning power off.
3 Check that the power indicator stops blinking and lights to solid orange. Switch the power switch to [O] (OFF).
When the projector has |
|
completed powering down, | power switch |
the power indicator will go off.
power indicator
16
