11
Setting Up (continued)
Setting Up (continued)
remote control
video inR-audio in-L S-video in
BNC
rgb
audio in1
audio in2 rgb out
audio out
R/CR/PRG/Y B/CB/PBHV
Y
control network
CR/PRCa/Pa
L
remote control
video inR-audio in-L S-video in
BNC
rgb
audio in1
audio in2 rgb out
audio out
R/CR/PRG/Y B/CB/PBHV
Y
control network
CR/PRCa/Pa
M
Monitor Projector
RGB in RGB cable rgb out
Connecting to a monitor
Speaker Projector
Connecting to a speaker (with amplifier)
Audio in Stereo Mini cable audio out
M
L
WARNING •
Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “Product Safety
Guide” and the following.
•
Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
•
Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
•
Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
•
Make sure that you firmly connect the power cord to the projector and wall outlet.
1Connect the connector of the power cord to
the AC inlet of the projector.
2Firmly plug the power cord’s plug into the
outlet. AC Inlet
Connector Plug
Outlet