3M X80, X70 manual Screen Menu, How to register your picture as the MyScreen, Message

Multifunctional Settings (continued)

SCREEN Menu (continued)

Item		Description
	Select the TURN ON or the TURN OFF using the / buttons. :
	TURN ON	TURN OFF
	When the TURN ON is selected, the following message function works.
	The message of the “AUTO IN PROGRESS” for the auto adjustment.
	The message of the ”NO INPUT IS DETECTED”
MESSAGE	The message of the ”SYNC IS OUT OF RANGE”
	The message of the ”Searching …”
	The message of the “Detecting …”
	The indication of the input signal by input change.
	The indication of the aspect ratio by changing the aspect ratio.
	The indication of “FOCUS” by adjusting the focus.
	Select the EXECUTE using the button to reset the SCREEN menu items. :
RESET	EXECUTE	CANCEL
	The items of the SCREEN menu are collectively returned to the initial setting.

How to register your picture as the MyScreen

MyScreen is pointed on the SCREEN menu. Press the button

The MyScreen menu appears.

Do you capture the picture from

the current screen?

MyScreen

Do you start capturing this picture?

ESC :NO ENT :YES

NO: Press the ESC/RESET button

If the ESC/RESET
button is pressed ...	YES: Press the ENTER button

The picture freeze and the frame for capturing appears.

Move the frame to the position of the picture

which you want to use, using // / buttons,

and press the ENTER button to register.

MyScreen

Move the capture area

as you want.

ESC :RETURN ENT :NEXT

Registering.

It takes about 1 minute to register.

Just when the picture registration is completed

the registered screen and

the message of the right is displayed for a few seconds.

My Screen

45%

MyScreen registration is finished.

If the picture registration failed,

the message of the right is displayed for a few seconds.

A capturing error has occurred.

Please try again.

32