A&D UT-302PBT manual EMC Tables, Cispr

EMC Tables

Guidance and manufacturer's declaration-electromagnetic emission

The UT-302PBT Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the UT-302PBT Thermometer should assure that it is used in such an environment.

Emissions test	Compliance	Electromagnetic environment guidance
RF emissions	CISPR 11	Group 1 The UT-302PBT Thermometer uses RF energy only
		for its internal function. Therefore, its RF emissions are very
		low and are not likely to cause any interference in nearby
		electronic equipment.
RF emissions	Class B
CISPR 11
Harmonic	Not	The UT-302PBT Thermometer is suitable for use in all
emissions	applicable	establishments, including domestic establishments and
IEC 61000-3-2		those directly connected to the public low-voltage power
Voltage	Not	supply network that supplies buildings used for domestic
		purposes.
fluctuations/	applicable
flicker emissions
IEC 61000-3-3

Guidance and manufacturer's declaration-electromagnetic immunity

The UT-302PBT Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the UT-302PBT Thermometer should assure that it is used in such an environment.

Immunity test	IEC 60601	Compliance	Electromagnetic environment-guidance
	test level	level
Electrostatic	± 6 kV	± 6 kV	Floors should be wood, concrete or ceramic
discharge (ESD)	contact	contact	tile. If floors are covered with synthetic
IEC 61000-4-2	± 8 kV air	± 8 kV air	material, the relative humidity should be at
			least 30 %.
Power frequency	3 A/m	3 A/m	Power frequency magnetic fields should be at
(50/60 Hz)			levels characteristic of a typical location in a
magnetic field IEC			typical.
61000-4-8

18