A.O. Smith 290 Deliverance Heat pump including controller, User manual for controller

2.Before Installation / Placement into service

Deliverance

Heat pump including controller

Installation manual with technical data

User manual for controller

2.1Important safety instructions

In the design and implementation of the heat pump, all relevant EU guidelines have been adhered to.

Work on the heat pump may only be performed by trained personnel! Take all necessary precautions in order to avoid accidents while working!

2.1.1Cooling system – safety instructions

The trained repairman must see to it that parts containing the refrigerant are emptied to a level at which the execution of the work can occur in a responsible manner without any dangers, before the commencement of repairs and service work.

When repairing and servicing the heat pump with the refrigerant system opened, and particularly for work with an open flame (soldering, welding, etc.), precau- tions must be taken to prevent fires from starting.

2.1.2Electrical circuit – safety instructions

When working on the heat pump, the main supply must always be disconnected – pull the plug out!

When connecting the heat pump to the power supply, the local and national rules and norms must be adhered to. In addition, regard must be paid to possible re- quirements posed by the energy supplier.

2.1.3Water circuit – safety instructions

Only drinking water quality water may be used. During installation, regard must be paid to the choice of materials and it must be ensured that they can work together without problems in the entire circuit.

Special attention must be paid when using galvanized components and components containing aluminum!

Safety equipment must be installed to prevent over pressure in the system.

All pipe work must comply with water safety regulations.

2.2Delivery

The heat pump is delivered without water, condense water tube and the safety equipment for the water circuit.

45