9
MEDIUM TEMPERATURE - ONE HEATERVERTICAL STORAGE TANKMEDIUM TEMPERATURE - ONE HEATERHORIZONTAL STORAGE TANK*PIPE RELIEF VALVE TO OPEN DRAIN.
†TANK TEMPERATURE CONTROL SET AT
DESIRED TEMPERATURE (MAX. 170°). HEATER
THERMOSTAT SET AT LEAST 5° HIGHER.
INSTALL IN ACCORDANCE WITH ALL LOCAL
CODES.
CAUTION: IF BUILDING COLD WATER SUPPLY
HAS A BACK-FLOW PREVENTER, CHECK
VALVE OR WA TER METER WITH CHECK V A LVE,
PROVISIONS FOR THERMAL EXPANSION OF
WATER IN THE HOT WA TER SYSTEM MUST BE
PROVIDED.
DANGER:
TEMPERATURE SETTING SHOULD NOT
EXCEED SAFE USE TEMPERATURE AT
FIXTURES. SEE WATER TEMPERATURE
CONTROL WARNING ON PAGES 17 & 18. IF
HIGHER PREHEAT TEMPERATURES ARE
NECCESARY TO OBTAIN ADEQUATE BOOSTER
OUTPUT, ADD AN ANTI-SCALD VAL VE FOR HOT
WATER SUPPLIED TO FIXTURES..