Typical Installation, Lowboys Uprights | A.O. Smith WATER HEATERS

TYPICAL INSTALLATION

LOWBOYS

UPRIGHTS

INSTALL SUITABLE DRAIN PANS UNDER HEATERS TO PREVENT DAMAGE DUE TO LEAKAGE. REFER TO WATER HEATER LOCATION ON PAGE 8.

INSTALL VACUUM RELIEF IN COLD WATER INLET LINE AS REQUIRED BY LOCAL CODES.

INSTALL THERMAL EXPANSION TANK OR DEVICE IF WATER HEATER IS INSTALLED IN A CLOSED WATER SYSTEM.

COMPACTS

TABLE TOPS

FIGURE1.

5

Image 5

A.O. Smith WATER HEATERS instruction manual Typical Installation, Lowboys Uprights, Compacts Table Tops

Contents

Residential Electric Important Definitions Safe INSTALLATION, USE and Service General Safety Table of Contents Introduction Preparing for the Installation Compacts Table Tops Typical InstallationLowboys Uprights Wiring Diagrams Hotterwatercanscald Mixing Valve Usage Locating the NEW Water Heater Installing the NEW Water HeaterFacts to Consider about the Location Insulation Blankets TEMPERATURE-PRESSURE Relief Valve Valve and Pipe Insulation On Selected Models Filling the Water Heater Temperatureadjustment Temperature Regulation For Your Information Periodic MaintenanceOperational Conditions Anode ROD Inspection Drain Valve Washer Replacement TEMPERATURE-PRESSURE Relief Valve OperationService Draining Leakage Checkpoints Part Description Repair Parts List Problem Cause Solution Troubleshooting Guidelines Conditions and Exceptions PXHT, Pxhs Claim Procedure Service and Labor ResponsibilityInstallation Information Limitation on Implied Warranties