3.1 Operation

SELECTING THE AUDIO DEVICE
To select the mobile device from the radio, press the button that would normally
activate the factory CD changer. This button varies by vehicle manufacturers.
In some applications (using cong.#8) the Audio2car is accessed like an XM
reciever, In these cases you will press the appropriate activation button. Some
radio models require pressing the “Seek >” button once, after pressing the CD
button. Yet, it may also be necessary to press Play on the mobile device itself to
begin playback. In some cases, if it is the rst time selecting the mobile device
from the radio it may take up to three minutes for the Audio2car to initialize.
RADIO DISPLAY DURING Mobile device OPERTION
Some factory radio’s may show DISC and TRACK numbers on the display of the
radio. The Audio2car interface does not send any information from the mobile
device to the radio. This means that the DISC and TRACK numbers shown on
the display will not and can not reect the song number on the mobile device due
to the complex nature of the music library. Some factory radio’s may ash zero’s
on the display of the radio, or toggle back and forth between Tracks “1” and “2”.
All these are normal behaviors and do not represent a malfunction.
14
Chapter 3- Operation