Aastra Telecom 41-001507-00 manual Connecting a Handset or Headset

Headset (Optional)

Installation and Setup

Connecting a Handset or Headset

Handset

Turn the phone over and locate the handset jack marked j. Insert one end of handset cord into the jack until it clicks into place. Then route the handset cord through the groove as shown in the illustration below. Attach the handset to the other end of the handset cord.

To Handset

Turn the phone over and locate the headset jack marked f. If you have a headset with an RJ9/RJ22 4-pin connector, insert the headset cord into the jack until it clicks into place. Then route the headset cord through the groove as shown in the above illustration.

If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector, remove the plastic headset jack adapter and then insert the cord into the jack until it clicks into place.

Pull to remove headset jack adaptor

Alert!

The headset port is for headset use only. Plugging any other devices into this port may cause damage to the phone and will void your warranty.

41-001507-00 REV00 – 04.2014 8