Aastra Telecom 41-001507-00 manual Welcome, Phone Features, Requirements, About This Guide

Welcome

Congratulations on your purchase of the Aastra Model 6867i IP Phone! The Aastra 6867i is a 9-line SIP phone designed for power users who demand a lot from both their phones and their networks. The Aastra 6867i pro- vides remarkable HD wideband audio and an enhanced speakerphone that utilizes dual microphones and advanced audio processing to achieve richer and clearer handsfree conversations. Supporting today’s high speed networks through dual Gigabit Ethernet ports, the 6867i offers a large color LCD display, 6 programmable soft keys, 4 programmable context sensitive system keys and native DHSG/EHS headset support. With its fully customizable hard key layout, XML capabilities, and an environmentally efficient PoE class 2 rating, the 6867i is one of the most advanced SIP desktop phones available on the market today.

Phone Features

•3.5” QVGA color TFT LCD with backlight

•Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with your computer

•USB 2.0 port (100mA maximum)

•6 programmable and 4 context-sensitive softkeys

•Press-and-hold speeddial key configuration feature

•Supports up to 9 call lines with LEDs

•Wideband handset

•Wideband, full-duplex speakerphone for handsfree calls

•Headset mode support

•AC power adapter (sold separately)

•Enhanced busy lamp fields*

•Set paging*

*Availability of feature dependant on your phone system or service provider.

Requirements

•SIP-based IP PBX system or network installed and running with a SIP account created for the 6867i phone.

•Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).

•Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended).

•Category 5/5e straight-through cabling (Category 6 straight-through cabling required for optimum Gigabit Ethernet performance).

•Power source:

–For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an Ethernet cable to connect from the phone directly to the network for power (no 48V AC power adapter required if using Power-over-Ethernet [PoE]).

–For Ethernet networks that DO NOT supply power to the phone:

Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no. GT-41080-1848 (sold separately) to con- nect from the DC power port on the phone to a power source

or

Use a PoE power injector or a PoE switch.

About This Guide

This manual describes how to physically set up your new 6867i IP Phone. Not all features listed are available by default and some may depend on your phone system or service provider. Contact your system administrator if you have any questions on what features and services are available to you on your system.

1 41-001507-00 REV00 – 04.2014