Aastra Telecom manual Tones you hear when using the M6310, Handsfree Calling

The basics: continued

Tones you hear when using the M6310

Dial tone	A continuous tone which means you can dial your call.
Busy tone	A tone which repeats once per second to indicate
	that the number you dialed is busy.
Reorder tone	A fast busy tone which indicates the call cannot proceed.
Confirmation	Two short beeps followed by silence informs you
tone	that the feature you used was successfully completed.
Call Waiting	Two short beeps sent at regular intervals which indicate
tone	a second incoming call.
Ring Again	One long and two short pings indicate that the line for
tone	which you left a Ring Again request has come free.
Special tone	Three beeps followed by a dial tone indicate that
	you can proceed with the feature you have activated

Handsfree Calling

The Handsfree feature allows you to use the built-in microphone and speaker on your M6310 to carry on a telephone conversation. While using Handsfree, speak clearly and face the M6310 — raise your voice a little if you move away from the telephone. You can also use the Mute feature to turn off your microphone. Mute is useful when back- ground noises interfere with your conversation or when you want to speak privately with someone at your desk.

To answer a call using Handsfree:

1.Press Yinstead of picking up the receiver.

2.If you wish to speak privately with the other person, pick up the handset. Handsfree turns off automatically.

3.Press rto end your call.

To use Handsfree during your call:

1.Press Yand replace the handset in the cradle.

2.To speak privately once again, pick up the handset.

3.Press rto end your call.

To mute your microphone while on a Handsfree call:

1.Press /.

2.To turn your microphone on again, press /once more.

8