Setting up local features: continued
Time and Date
To set the time and date on your M6310:
1.Press b.
2.Press @until Time and Date Set? is shown on the display.
3.Press a.
4.Enter the date using the format shown on the display.
5.Enter the current time based upon the 24 hour clock.
6.Press ato save the new time and date settings.
7.Press bor rto exit programming mode.
To select the time and date display format:
1.Press b.
2.Press @until Time and Date Format? is shown on the display.
3.Press a.
4.Press @until the desired format is shown on the display.
5.Press ato save the new format setting.
6.Press bor rto exit programming mode.
Call Timer
The Call Timer uses the display to show the time elapsed since the start of a normal call (the timer appears on the display 5 seconds after the call starts and remains on the display 5 seconds after you end the call). Follow the instructions below to enable the Call Timer.
To enable the Call Timer:
1.Press b.
2.Press @until Call Timer? is shown on the display.
3.Press a.
4.Press @to enable or disable the Call Timer.
5.Press ato save the new setting.
6.Press bor rto exit programming mode.
12
