Hardware Instal lation SY- P4I865PE Plus DRAGON 2
10
O
Chassis Cooling Fan (CHAFAN1) connector
This connector is to connect your chassis fan to your motherboard.
This motherboard supports up to 2 chassis fans. It allows you to
monitor the speed of CHAFAN1 in CMOS setup or by using the
SOYO Hardware Monitor software. Please check the (2) Chassis
Cooling Fan (CHAFAN1, CHAFAN2) paragraph on page 31 for
more details.
P
Flash BIOS
This chip contains the system BIOS firmware, and is software
upgradable. It's size is 4Mbit. For updates of your Flash BIOS,
please go to http://www.soyousa.com. For details on how to setup
your BIOS, please go to the BIOS SETUP UTILITY chapter on
page 41.
Q
Front Panel connectors (J25)
This header allows you to connect the switches and LEDs on your
front panel. Please check the C. Front Panel Connections chapter
on page 23 for more details and lay-outs.
R
5V Stand-By Indicator LED
The ATX 12V power supply will always supply a 5V standby
voltage to your motherboard so that it can power on via for
example Wake On Lan technology. This LED shows that your ATX
12V power supply is supplying this standby voltage to your
motherboard.
S
SATA Connectors
These connectors allow you to attach one UDMA 150 hard disk to
each connector. For more information on these connectors check
the A.IDE Device Installation (HDD, CD-ROM) paragraph on
page 20.
T
USB 2.0 connectors
These connectors support 2 USB 2.0 ports per connector. For
details on the lay-out, please check the 5. Universal Serial Bus
(USB1/USB2, USB3/USB4, USB20_1/USB20_2) paragraph on
page 29.
U
Chassis Cooling Fan (CHAFAN2) connector
This connector is to connect your chassis fan to your motherboard.
This motherboard supports up to 2 chassis fans. It allows you to
monitor the speed of CHAFAN1 in CMOS setup or by using the
SOYO Hardware Monitor software. Please check the (2) Chassis
Cooling Fan (CHAFAN1, CHAFAN2) paragraph on page 31 for
more details.