Abocom IFM560 manual Hardware Installation

HARDWARE INSTALLATION

Precautions:

Please be sure you take adequate anti-static precautions when handling this product. The simplest way to achieve this is; before you begin and every minute or so during the hardware installation touch a non-painted surface of the computer’s chassis.

1.Before installing the device, make sure the computer is turned off.

2.Remove the expansion slot cover from the computer.

3.Carefully slide the PCI modem card into an available PCI slot, push it evenly and firmly home and ensure it is screwed securely in place using the mounting screw (PCI slots are 85mm long and positioned 40mm from the PC’s rear panel. Generally there are several PCI slots side by side).

4.Plug one end of the telephone cable into the Modem line jack and the other end to the telephone jack in the wall.

5.Replace the cover.

6.After hardware installation is done, move on to the software installation.

-1 -