6430M Mainboard

Chapter 2 Installation

CHAPTER 2

INSTALLATION

2-1 INSTALLATION PROCEDURE

Before installing the computer, please prepare all components such as CPU, DRAM; peripherals such as hard drive, keyboard, CD-ROM and accessories such as cables. Then, install the system as following:

-Put CPU / heat sink (refer to CeleronTM CPU installation guide or see the following setup chapter), and DRAM modules on the mainboard.

-Plug add-on cards into PCI slots, if needed.

-Connect cables to peripheral devices, especially for COM2 connector.

-Make sure all components and devices are well connected, turn on the power and setup System BIOS based on your configuration.

-Install peripheral devices, add-on card drivers and test them.

-If all of above procedures are running successfully, turn the power off and screw the chassis cover to the chassis.

9

Page 12
Image 12
Intel ATC6430M appendix Chapter Installation