Chapter 3 Award BIOS Setup ATC6430M Mainboard
32
3-2-6 PNP/PCI CONFIGURATION This screen configures the PCI Bus slots.
CMOS Setup Utility Copyright © 1984-1998 Award Software
PnP/PCI Configurations
PNP OS Installed No
Reset Configuration Data Disabled
Resources Controlled By Auto
Ø IRQ Resources Press Enter
Ø DMA Resources
Press Enter
Ø Memory Resources Press
Enter
PCI/VGA Palette Snoop Disabled
Item Help
--------------------
Menu Level Ø
Select “Yes” if you are
using a Plug and Play OS.
Select NO if you need the
BIOS to confirm
non-boot device.
↑↓←→Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
PNP OS Installed Select “Yes” if you are using a Plug nad Play OS. Select “No” if
you need the BIOS to confirm non-boot device.
Reset Configuration Data This item allows you to determine whether to reset the
configuration data or not.
Resource Controlled by The Award Plug and Play BIOS has the capability to
automatically configure all of the boot and Plug & Play compatible devices. However,
this capability means absolutely nothing unless you are using a Plug and Play OS such
as Windows 95. Choices are Auto and Manual.
IRQ Resources; DMA Resources When resources are controlled manually, assign
each system interrupt/DMA channel a type, depending on the type of device using the
interrupt/DMA channel.
IRQ3/4/5/7/9/1011/12/14/15, DMA0/1/3/5/6/7 Assign to This item allows you to
determine the IRQ/DMA assigned to the ISA bus and is not available to any PCI slot.
Choices are Legacy ISA and PCI/ISA PnP.
Memory Resources “Memory Resources” has two events:
Resources Memory Base N/A