Encryption Tab, Description Data Encryption, Open

Encryption Tab

Use the Encryption Tab to configure your WEP settings. WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network.

Item	Description
Data Encryption	WEP	is	a	data	security
	mechanism based on a 64 Bit/128
	Bit shared key algorithm. Check
	this box to enable WEP
	encryption.
Auth. Mode	The authentication mode defines
	configuration		options		for	the
	sharing of wireless networks to
	verify	identity		and	access
	privileges of		roaming		wireless
	network cards. You may choose
	between	Open		Authentication,
	Shared	Authentication,				and
	Auto.

- 13 -

Page 15

Image 15

Abocom WP2000 manual Encryption Tab, Description Data Encryption, Auth. Mode, Open, Shared Authentication Auto

Contents

802.11b Wireless PCI Card Part15, Class B Regulatory Statements Install the Driver & Utility InstallationPage Install the Device Page Page Verify Device Installation Network Status Icon Configuration Icon Link Status Link Info Tab Accessing the Configuration Utility Or 11Mbps or Auto Channel SignalDescription Status Tx Rate Operating Configuration TabMode Access Point or Peer-to -Peer Channel Description Preamble Or 11Mbps or Auto Description Data Encryption Auth. ModeShared Authentication Auto Encryption Tab Key Length Bit or 128 Bit Key Format Authentication Open Authentication, thenShared Shared Authentication is when Default Key Apply Displays the current Ssid settingWireless Network Adapter Site Survey Tab Type Description SignalAccess Point or Peer-to-Peer As Tx Rate, Preamble type, Auth. Mode Add Profiles Tab Utility About Tab

Encryption Tab

Description

Data Encryption

WEP

Auth. Mode

Open

Shared

Authentication,

Auto.