Accell Cardio Comfort Pacer owner manual Exercising

Models: Cardio Comfort Pacer

1 68
Download 68 pages 44.15 Kb
Page 4
Image 4

O W N E R ' S M A N U A L C a r d i o C o m f o r t P a c e r

NOTE! Always make sure that the locking knob is properly fastened before starting to exercise!

CONSOLE INCLINATION ADJUSTMENT

Set the inclination of the meter so that it corresponds to your height and exercise position.

ADJUSTMENT OF SUPPORT FEET

If the equipment is not stable, adjust the adjustment screws below the support feet as necessary.

EXERCISING

If the product is not stable, adjust the stabilizing screws under the rear support appropriately.

EXERCISE LEVEL

Working out with this device is excellent aerobic exercise, the principle being that the exercise should be suitably light, but of long duration. Aerobic exercise is based on improving the body’s maximum oxygen uptake, which in turn improves endurance and fitness. The ability of the body to burn fat as a fuel is directly dependent on its oxygen-uptake capacity. Aerobic exercise should be above all pleasant. You should work up a light sweat but you should not get out of breath during the workout.

You should exercise at least three times a week, 30 minutes at a time, to reach a basic fitness level. Maintaining this level requires a few exercise sessions each week. Once the basic condition has been reached, it is easily improved, simply by increasing the number of exercise sessions. You should start slowly at a low pedaling speed and low resistance, because for an overweight person strenuous exercise may subject the heart and circulatory system to excessive strain. As fitness improves, resistance and pedaling speed can be increased gradually.

HEART RATE

No matter what your goal, you’ll get the best results by training at the right level of effort, and the best measure is your own heart rate.

HEART RATE MEASUREMENT WITH HANDGRIP SENSORS

Heart rate is measured from the hands using the sensors located on the handlebars. The sensors measure electric impulses, which

are formed when a person’s heart beats. Measurement is started by touching both handlebar sensors simultaneously. To ensure reliable heart rate measurement, skin must be slightly moist and skin contact with sensors must be continuous. If skin is too dry or too wet, the heart rate measurement operation from the hands is less reliable. Try to keep your upper body and palms relaxed and still.

TELEMETRIC HEART RATE MEASUREMENT

The most reliable heart rate measurement is achieved with a telemetric device, in which the electrodes of the transmitter fastened to the chest transmit the pulses from the heart to the console by means of an electromagnetic field.

NOTE! If you are fitted with a pacemaker, please consult a physician before using a wireless heart rate monitor.

If you want to measure your heart rate this way during your workout, moisten the grooved electrodes on the transmitter belt with saliva or water. Fasten the transmitter just below the chest with the elastic belt, firmly enough so that the electrodes remain in contact with the skin while exercising, but not so tight that normal breathing is prevented. If you wear the transmitter and belt over a light shirt, moisten the shirt slightly at the points where the electrodes touch the shirt. The transmitter automatically transmits the heart rate reading to the console up to a distance of about 1 m.

If the electrode surfaces are not moist, the heart-rate reading will not appear on the display. If the electrodes are dry, they must be moistened again. Allow the electrodes warm up properly to ensure accurate heart rate measurement. If there are several telemetric heart rate measurement devices next to each other, the distance between them should be at least 1.5 m. Similarly, if there is only one receiver and several transmitters in use, only one person with a transmitter should be within transmission range. The transmitter is switched to an active state only when it is being used for measurement. Sweat and other moisture can, however, keep the transmitter in an active state and waste battery energy. Therefore it is important to dry the electrodes carefully after use.

When selecting training attire, please note that some fibres used in clothes (e.g. polyester, polyamide) create static electricity, which may prevent reliable heart rate measurement. Please note that a mobile phone, television and other

Cardio Comfort Pacer 2007_PUBLIS4 4

13.7.2007 11:01:36

Page 4
Image 4
Accell Cardio Comfort Pacer owner manual Exercising

Cardio Comfort Pacer specifications

The Accell Cardio Comfort Pacer is a state-of-the-art cardiac pacing system designed to offer enhanced comfort and reliability for patients requiring cardiac rhythm management. Its innovative features cater to both patients and healthcare providers, ensuring optimal performance in various clinical situations.

One of the standout features of the Accell Cardio Comfort Pacer is its advanced programming capabilities. The device offers multiple pacing modalities, including DDD, VVI, and AAI modes, which can be tailored to meet individual patient needs. This flexibility allows healthcare providers to customize therapy based on the patient's specific cardiac condition, promoting better outcomes and improving overall quality of life.

The Accell technology embedded within the Cardio Comfort Pacer ensures precise sensing and pacing, reducing the incidence of inappropriate pacing and maximizing patient safety. An intelligent algorithm monitors the patient’s heart rhythms continuously, making real-time adjustments to pacing rates and timings. This self-adaptive feature enhances the device's responsiveness to changes in a patient’s activity level and physiological state.

Comfort is a key focus of the Accell Cardio Comfort Pacer. Its compact design and lightweight construction make it easier for patients to wear without discomfort. The device is engineered to minimize lead displacement and improve stability, which is crucial for ensuring consistent performance over time. Furthermore, the biocompatible materials used in its construction help reduce risks of allergic reactions and other complications.

Another significant characteristic of the Accell Cardio Comfort Pacer is its long battery life. Patients benefit from extended intervals between replacements, reducing the need for surgical interventions and associated risks. The device is also equipped with advanced telemetry capabilities, allowing for remote monitoring by healthcare professionals, which increases patient engagement and fosters proactive management of cardiac health.

The integration of Bluetooth technology in the Accell Cardio Comfort Pacer enables seamless communication with smartphones and healthcare applications. This connectivity facilitates real-time monitoring of patients' data and enhances the overall management of their cardiac health.

In summary, the Accell Cardio Comfort Pacer is a sophisticated cardiac pacing solution that combines advanced features, user-friendly design, and a commitment to patient comfort and safety. Its customizable programming options, intelligent sensing technology, and remote monitoring capabilities set it apart in the rapidly evolving landscape of cardiac devices. With a focus on improving patient outcomes, the Accell Cardio Comfort Pacer stands as a testament to innovation in cardiac care.