IOP-048

MPG-3202

MPG-3202CEP-075

ACCELCORP.

MRS-402

MRS-402 CEP-059

ACCEL CORP.

MPS-324

24-Point Photocoupler Input Board / 24-Point Transistor Output Board

[Characteristics]

This is a dedicated input/output board equipped with 24-points for each input and output. Each input/output is equipped with an LED monitor. The input and output interfaces have equivalent specifications with MOP and MIP, respectively.

[Specification]

Power source: DC (5V) 12V~24V (for I/O control).

24-point optocoupler input. 24-point open collector output.

(1)* If used with DC 5V, the resistor array needs to be replaced. Consumed current: 50 mA

(2) [Accessories]

(1) Power connector (H4P-SHF-AA)

JST

*1

 

(2) Contacts (BHF-001T-0.8SS)

JST

*4

S-Shape-Compatible PG Board & Encoder Counter Board

 

(2-Axis)

[Characteristics]

A general-use PG board loaded with pulse generation and counter ICs that can support two axes. Interface of the pulse output and the encoder is RS-422 specification that can deal with high-speed (1M pps) pulse output and input. The mounted PGIC is X3202 that can deal with the S shape and is equipped with various intelligent functions.

[Specification]

Power source: DC 12V~24V

(1) Pulse output: Differential pulse output *2 axes / RS-422 specification * 2 axes Encoder input: Differential pulse input (A-B phase encoding) * 2 axes

(2) [Accessories]

(1) Power connector (H4P-SHF-AA)

JST

*1

 

(2) Contacts (BHF-001T-0.8SS)

JST

*4

RS-232 Expansion Board

 

RS-232C

[Characteristics]

This is a 2CH RS-232C(RS-485) expansion board, of which up to two can be installed. Because it is an intelligent design by dual-port RAM, it does not provide burden on the CPU. The interface is photo-isolated, and the modem control terminal is RTS×CTS only. Software support is dealt with in a similar way to the standard commands and functions, assigned to #3~#6.

[Specification]

(1) RS-232 standard interface. Input buffer 1K byte. Consumed current: 50 mA

(2) [Accessories]

(1) Power connector (H4P-SHF-AA)

JST

*1

 

(2) Contacts (BHF-001T-0.8SS)

JST

*4

3A Power Source Board

4(8)-Point Relay Output

(3)

[Characteristics]

Although MPC-68K is equipped with a 1 A power source, when the system scale becomes large, it becomes short of current. In a large-scale system, this MPS-324 is used. The supplied current is 3 A. Also, MPS-324 is equipped with a 4-point relay output circuit (4 more relays can be further added). A PC98-bus compatible DC ±12 V DC-DC converter can be installed on the board. By this, peripheral boards for 98 requiring ±12 V power source can be used.

(1)

[Specification]

 

 

 

 

 

 

Power source: DC 24V±10%. 4(8)-point relay output.

 

 

(2)

Consumed current: 3 A supply

 

 

 

[Accessories](1) Power connector (H4P-SHF-AA)

JST

*1

 

(2) Contacts (BHF-001T-0.8SS)

JST

*4

 

(3) Connector (HIF-3BA-34D-2.54R)

Hirose

*1

-6-

Page 7
Image 7
Accell MPC-68K Series, MPC-LNK, MPC-816 Series, MPC series manual IOP-048 MPG-3202, MRS-402, MPS-324