Accell MPC-LNK, MPC-816 Series, MPC series manual MBK-68, Mpc-Slink, RACK-68K6 RACK-68K3 ADP-68K

MBK-68

MBK-68K CEP -064A

MPC-SLINK

Multifunction Board RS-422 * 2CH

[Characteristics]

MBK-68 is a function-addition board of MPC-68K and MPC-683. The following functions are added. Please insert this board to the right end of the rack (on the opposite side of CPU). Bus terminator is added, making a large-scale system more reliable.

Display of the statement number during execution is added. 7 SEG display. Digital Corp GP70 Series can be connected. Other supports are under evaluation. Large-scale data arrays can be dealt with by 68K and 683 interpreters.

Battery backup function is added to MPC-683.

(1)	[Specification]
	Consumed current: 200 mA. Photo-isolated RS422.
(2)	[Accessories]	(1) Power connector (H4P-SHF-AA)	JST	*1
		(2) Contacts (BHF-001T-0.8SS)	JST	*4
Slink I/O Board				MAX 256 * 2 (I/O)

MPC-SLINK CEP-069

ACCEL CORP

[Characteristics]

MPC-SLNK is a board which supports the Sanks SLINK system. It is equipped with two host module made by Sanks as a default (maximum 512 points). Also, up to two MPC- SLNK boards are supported by 68K. Assigned I/O area starts at 2000.

RACK-68K6 RACK-68K3

ADP-68K

[Specification]

Consumed current: 200 mA (per module). SLINK specification follows that of Sanks.

(1) [Accessories]	(1) Housing (5557-08R)	Molex	*2
[Compatible parts]	Please purchase upon necessity.
Pressure-attaching tool (57027-5000 (Molex))		Extracting tool (57031-6000 (Molex))
Contacts (5556TL (Molex))		Housing (5557-04R	(Molex))

6-Slot Rack

3-Slot Rack

[Characteristics]

These are board racks dedicated to MPC-68K. Their design is highly condensed with a board pitch of 20 mm. A mounting flange attached as a default is attachable toward any of the top, bottom, front, and back direction. RACK-68K has a 3-slot and a 6-slot version. Also, by a connection kit sold separately, up to three racks can be connected, constructing a system with maximum of 18 slots. The 6-slot rack can be arranged on either the left or the right side, but the 3-slot rack can only be arranged on the right side. Because the bus construction is based on PC98 I/O bus, various kinds of commercial I/ O boards for 98 can be used.

[Specification]

PC98 I/O bus standard, 20 mm pitch, 6 slots.

[Accessories]	Screws (M3*4)	Rack assembly use	* 16
	Screws (M3*12)	For attaching the bus	* 4

Connection Kit

[Characteristics]

This is a connection kit for said racks. By this, RACK-68K can be expanded up to 18 slots. The components are spacers and a 50-pin flat cable. Only the I/O bus signal is connected by the 50-pin flat cable. By this connection kit, racks can be mechanically and electrically (conduction-wise) connected to an arbitrary size, but the reliability will decrease if the bus- signal width exceeds 50 cm.

[Accessories] Screws (M3*4)	*8
Spacers (SP-17)	*4

-7-