Make sure the projection screen is between the required distance 4.9
to 39.4 feet (1.5 to 12.0 meters) from the projector (refer to page 14).
Problem: The image is stretched when displaying 16:9 DVDThe projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio from the on screen menu.
Problem: Image is reversed Select “Management-->Projection” from the OSD and adjust the
projection direction.
Problem: Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp” section
(refer to page 35).
Problem: LED lighting messageMessage Power-LED
(Green) Temp-LED Lamp-LED
Standby State
(Input Power Cord) Flashing
Lamp Lighting
Power On
Power Off (Cooling)
Error (Lamp Fail)
Error (Thermal Fail)
Error (Fan Fail) Flashing
Error (Over Temp.)
Error (Lamp Breakdown)
Steady light =>
No light =>
O
O
O
O
O
33 ... EnglishAppendices