Security Settings A. Press “Enter” to set password. (First time)
1. Password must be 4~8 bits, the default value is “0000”.
2. Displayed on the screen by “*” while inputting.
3. Use keys to select your input bits, and then press
“Enter” key to confirm your selection.
4. Move to and then press the “Enter” key to confirm finally.
5. On this screen, press the “Menu” key which will automatically
jump to then press the “Enter” key to confirm your selection.
(“Menu” can be switched over between the position and
at present)
6. When there is an input error go to to delete this bit. (You can
press the “Menu”, key and then press the key.)
B. Press “Enter” to set security protection.
Security Mode
On: Choose “On” to use security verification while the user
switches on the projector.
Off: When the user switches on projector without password.
Timer: Displays the usable hours when switching on the projec-
tor. When the time remaining is 0, the time out message will
appear, and then press “Menu” or “Enter” to input password.
Timer Setting: When the Timer is selecting, this function can be
used.
Change Password: Press “Enter” to change the password.
28
English ...
User Controls
O
I
I
I
O
O