11 ... English

Powering On the Projector

1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash green.
3. Turn on the lamp by pressing “Power/Standby” button on
the control panel. The Power LED will turn green.
The first time you use the projector, you can select your
preferred language from the quick menu after the startup
screen display.
4. Turn on your source (computer, notebook, video player,etc.).
The projector will detect your source automatically.
If you connect multiple sources at the same time, use the
“Source” button on the control panel or remote control
to switch.

Powering On/Off the Projector

Turn on the projector
first and then the signal
sources.
1
Power/Standby
2
Lens Cap
Quick Menu
Select Language
English
Deutsch
Français
Italiano
Español
Português
Nederlands
Polski
Press Enter to Set
Installation
1
2