Resetting the Memory Program Cycle Counter |
| Using the Double Quantity button |
GB
1.Clear all operations by pressing the Stop/Cancel() button.
The display will show “ : 0 “.
2.Hold down Number 0() and then press Defrost()
button.
The Microwave will emit a Beep sound confirming the reset operation.
The display will show “ : 0 “.
Setting the Sound
1.Press the Sound button to adjust sound volume. The basic sound volume is "LO" and when you press the Sound
button repeatedly, the sound volume changes in the following order - MED, HI, OFF, LO one by one.
2.Press the Start( /+30s) button to exit Sound mode.
The display will show “:0”.
Indicator | Sound |
|
|
HI | Loud |
|
|
MED | Middle |
|
|
LO | Low |
|
|
Blank | Off |
|
|
1.Press the Double Quantity() button.
2. By using the Number buttons, enter the Memory Program number from 1 to 20.
• For example, suppose you press 5() button, for Memory Program 5 which is HI Power Level, I Stage cooking with a time of 6 minutes and 30 seconds, 6:30.
3.The Memory Program then operates for double the user- programmed time, which in this case makes 13 minutes.
(6:30 x 2 = 13:00)
✉The maximum allowable cooking time is 30 min. If doubling the programmed time exceeds the maximum allowable cooking time, the display will show “E3”, then pressStop/Cancel( ) button.
10