Samsung CM1049/XET manual Using the Check button, Reading each Memory Program’s Cycle Counter

Using the Check button

Confirming the cooking time and Power Level in each Memory Program

1.Clear all operations by pressing the Stop/Cancel( ) button.

Press the Check button to enter Check mode.

2. By using Number buttons, enter the Memory Program number from 1 to 20.

• For example, suppose you press 5(), for Memory Program 5 which is HI power Level, I Stage cooking with a time of 6 minutes and 30 seconds, 6:30.

•First, 5 will be displayed, but will change to show the Memory Program settings.

3.After one second, the display will clear automatically.

If you want to check other Memory Programs, just enter the Memory Program numbers.

4.Press the Stop/Cancel() botton to exit the Check mode.

Reading each Memory Program’s Cycle Counter GB

1.Clear all operations by pressing the Stop/Cancel() button.

Press the Check button to enter Check mode.

2.Press the Start( /+30s) button, and then press any Number button, from 1 to 20, and the number of cycles for that particular Memory Program will be displayed. The

cycle count is displayed in units of 10.

• For example, if Memory Program 5 has been used 100 times, the display will show “10”.

☛As the display uses units of 10, the cycle counts are approximate. The cycle count displayed increases every ten cycles.

☛For example, if the cycle count were 90-99, “9” would be displayed, The “9” would change to “10” on the 100th cycle. The cycle counter function has a limit of 99,990 cycles. Once that number is exceeded, the cycle counter will automatically clear and start again from “0”.

3.After one second, the display will clear automatically. If you want to check the cycle count of other Memory Programs, just enter the Memory Program numbers.

4.Press the Stop/Cancel() button to exit the Checking mode.

9