Accton Technology 12se manual RJ-45 Ethernet Ports, Fiber Optic Ethernet Port

Fast EtherHub-12se User’s Guide

￿7UDQVPLW￿5HFHLYH￿$FWLYLW\

Color: Green

Label: Traffic

Function: Indicates traffic traversing the port.

Condition

%/,1.,1*

2))

Indication

,QGLFDWHV￿WKH￿SRUW￿LV￿WUDQVPLWWLQJ￿RU￿UHFHLYLQJ￿SDFNHWV￿ EOLQNLQJ￿LV￿SURSRUWLRQDO￿WR￿WKH￿WUDIILF￿SDVVLQJ￿WKURXJK￿WKH￿SRUW￿

1R￿SDFNHWV￿DUH￿EHLQJ￿WUDQVPLWWHG￿IURP￿WKLV￿SRUW￿

RJ-45 Ethernet Ports

This hub includes 11 Fast Ethernet station ports; of which Port 12 can also serve as a daisy-chain port. Use straight-through twisted-pair cable to connect the shielded MDI-X station ports to a workstation or server; or to connect the MDI port to another network interconnection device, such as a hub or switch. When using Port 12, remember to set the selection switch to MDI-X when connecting to a workstation, or to MDI when cascading to another hub or switch. Remember to use 100Wcategory 5 straight-through twisted-pair cable (STP or UTP) for all standard connections.

Note: If you must cascade between MDI-X station ports on two hubs, then use crossover cable.

Fiber Optic Ethernet Port

The 100BASE-FX port provides TX/RX jacks for connecting to any compatible network device using multimode fiber optic cable with SC or ST type connec- tors. Mate the TX/RX jacks with the RX/TX jacks on the target device. (Note that 50/125 mm and 62.5/125 mm cable are the only types supported by this hub.) This port can be connected to any device that provides media connection for 100BASE-FX, such as a workstation, high-speed server, or other network interconnection device.

Hardware Reference 4-5