Fast
System Diagnostics
Installation
Verify that all system components have been properly installed. If one or more components appear to be malfunctioning, test them in an alternate environment where you are sure that all the other components are functioning properly.
Cabling
1.Verify that the cabling type is correct. Be sure all cable connectors are securely seated in the required ports.
2.Make sure all devices are connected to the network. Equipment may have been unintentionally disconnected from the network.
External Adapters
Make sure the network adapter cards installed in the workstations are compatible with your network media type and are in good working condition.
Configuration
If problems occur after altering the network configuration, restore the original connections, then try to track the problem down by implementing the new changes, one step at a time. Ensure that cable distances and other physical aspects of the installation do not exceed recommendations.
Hub Integrity
As a last resort verify the hub’s integrity with a
Troubleshooting |