Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following:

Power Cord Set

U.S.A. and Canada

The cord set must be UL-approved and CSA certified.

 

 

 

The minimum specifications for the flexible cord are:

 

- No. 18 AWG - not longer than 2 meters, or 16 AWG.

 

- Type SV or SJ

 

- 3-conductor

 

 

 

The cord set must have a rated current capacity of at least 10 A

 

 

 

The attachment plug must be an earth-grounding type with NEMA

 

5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.

 

 

Denmark

The supply plug must comply with Section 107-2-D1, Standard

 

DK2-1a or DK2-5a.

 

 

Switzerland

The supply plug must comply with SEV/ASE 1011.

 

 

U.K.

The supply plug must comply with BS1363 (3-pin 13 A) and be fitted

 

with a 5 A fuse which complies with BS1362.

 

 

 

The mains cord must be <HAR> or <BASEC> marked and be of type

 

HO3VVF3GO.75 (minimum).

 

 

Europe

The supply plug must comply with CEE7/7 (“SCHUKO”).

 

 

 

The mains cord must be <HAR> or <BASEC> marked and be of type

 

HO3VVF3GO.75 (minimum).

 

 

 

IEC-320 receptacle.

 

 

Veuillez lire à fond l'information de la sécurité suivante avant d'installer le Switch:

AVERTISSEMENT: L’installation et la dépose de ce groupe doivent être confiés à un personnel qualifié.

Ne branchez pas votre appareil sur une prise secteur (alimentation électrique) lorsqu'il n'y a pas de connexion de mise à la terre (mise à la masse).

Vous devez raccorder ce groupe à une sortie mise à la terre (mise à la masse) afin de respecter les normes internationales de sécurité.

Le coupleur d’appareil (le connecteur du groupe et non pas la prise murale) doit respecter une configuration qui permet un branchement sur une entrée d’appareil EN 60320/IEC 320.

La prise secteur doit se trouver à proximité de l’appareil et son accès doit être facile. Vous ne pouvez mettre l’appareil hors circuit qu’en débranchant son cordon électrique au niveau de cette prise.

L’appareil fonctionne à une tension extrêmement basse de sécurité qui est conforme à la norme IEC 60950. Ces conditions ne sont maintenues que si l’équipement auquel il est raccordé fonctionne dans les mêmes conditions.

iv

Page 8
Image 8
Accton Technology ES3628EA manual Power Cord Set

ES3628EA specifications

Accton Technology's ES3628EA is an advanced network switch designed to meet the growing demands of modern enterprise environments. This managed switch is engineered to provide a robust solution for delivering high-speed connectivity and reliable performance across local area networks (LANs). The ES3628EA features a 28-port configuration, combining 24 Gigabit Ethernet ports and 4 SFP (Small Form-factor Pluggable) uplink slots, allowing for flexible network design and scalability.

One of the standout characteristics of the ES3628EA is its support for Layer 2 and Layer 3 functionalities, offering network administrators enhanced control and management over data traffic. With features such as VLAN (Virtual Local Area Network) support, the switch enables efficient segmentation of networks for improved security and performance. VLAN tagging allows for the separation of different data types on the same physical infrastructure, reducing broadcast traffic and enhancing overall efficiency.

Additionally, the ES3628EA supports advanced Quality of Service (QoS) mechanisms, which prioritize critical network traffic, ensuring optimal performance for applications like voice over IP (VoIP) and video streaming. The ability to configure multiple queues allows administrators to define traffic patterns, allocate bandwidth effectively, and minimize latency.

The device also incorporates comprehensive security features, including port security, access control lists (ACLs), and support for802.1x authentication. These capabilities help safeguard sensitive data and restrict unauthorized access to the network.

Power over Ethernet (PoE) support is another significant feature of the ES3628EA. This technology allows the switch to deliver power alongside data over Ethernet cables, facilitating the connection and powering of devices like IP cameras, VoIP phones, and wireless access points, all without the need for additional power sources.

Furthermore, the ES3628EA boasts a user-friendly web-based interface for configuration and management, making it accessible for network administrators of varying expertise. In addition to the web interface, it also supports SNMP (Simple Network Management Protocol) for more advanced network monitoring and control.

Designed for reliability and performance, the Accton Technology ES3628EA is a versatile solution that integrates seamlessly into diverse networking environments, delivering the capabilities required for today’s demanding applications. Its blend of speed, security, and advanced management functionalities makes it an excellent choice for enterprises looking to enhance their network infrastructure.