Battery Symbol on the Display | Accu-Chek 98/79/EC specification

2.Insert the 3-volt battery (type 2032) into the compartment with “+” side facing you.

+

3. Snap battery cover back in place. If time and date feature was set previously, the meter will turn on automatically. Confirm that

the time and date are set

correctly. If time and date have not been set previously, wait 5 seconds, then turn meter ON. The meter beeps if the beeper is turned on.

Battery Symbol on the Display

When a battery symbol appears on the display, your battery is weak and has only enough power to run a few more tests. Although the meter will still provide accurate results, you need to replace the battery as soon as possible.

Battery is low.

2

Image 12

Accu-Chek 98/79/EC manual Battery Symbol on the Display, Time and date are set

Contents

Page Page Welcome Page Contents Quick Reference Display Guide About the Accu-ChekSensor Meter About the Accu-Chek Sensor Meter Special Features About the Accu-ChekSensor Comfort Test Strip Inserting the Battery Battery Symbol on the Display Time and date are set Battery must be replaced to continue testing Setting the Beeper, Time, Date, Year, and Hypo Flag Turning the Beeper On or OffDoes the beeper have to be turned on? Proceeding to Press and release the right or left arrow button Setting the Time, Date and Year Page Setting the Hypo Flag Coding/Calibrating Your Meter 731 Testing To begin testing, you will need the following itemsGathering Supplies Performing a Test 731 Blood will be drawn What if I still see yellow on the test strip? Blood glucose result is displayed in mg/dL or mmol/L Your Test Results on Marking a Result with a Flag, Asterisk Understanding Your Test Results Do’s and Don’ts Store strips outside original vial Use expired test strips Proper Test Strip Appearance Using Memory To recall results and averages stored in memoryPage Quality Control Checks What are quality control checks? To do a quality control check, you need Accu-ChekSensor Comfort Test Strips Performing a Quality Control Check Check that the code Gently squeeze the bottle to form one small drop Example of an acceptable Level 1 control result Remove test strip from meter and discard Understanding Control Results Cleaning Caring For Your MeterDisplay Check Storage and Handling Page Transferring Data Quick Reference Display Guide Meter needs to be codedOFF and insert code key See Meter is ready to accept a test strip Blood glucose result appears on display see Memory Displays Page Battery Displays Battery power is low Change battery soonDisplay Messages Quality Control Check Displays Example of an unacceptable control result Error Messages Your blood sugar may be Extremely low, an incorrectTest strip is damaged or Page Or cool the meter Technical Data Product Specifications Power Supply 2032 CR 2032, DL 2032 orEquivalent Construction Hand held Protection Class Product Safety Information For in vitro diagnostic use Manufactured by Warranty and Service Instructions This warranty does not affect any statutory or other rights Supplies and Accessories Index Viii HI display Troubleshooting Any Questions Page 2003/06